Refractometer Parts and Accessories

MISCO is the source for all your refractometer parts and accessories. Parts are available for the MISCO traditional analog refractometer, the Palm Abbe digital handheld refractometer, inline/process refractometers and sensors, as well as benchtop/laboratory refractometers.

11 Item(s)

per page

List  Grid 

Set Descending Direction
  1. Rubber Armor for Refractometer

    Rugged Rubber Armor for Palm Abbe Digital Refractometer

    Adding a Rubber Armor Jacket to a Palm Abbe refractometer increases its durability and provides a better grip. Made of high-grade silicone rubber, the Rubber Armor Jacket is custom fit and will help protect your Palm Abbe refractometer from bumps and scratches. Compatible with Palm Abbe refractometers with or without the Rugged Proof-Case.

    COLORS: Black, Safety Orange, Gray.

    Learn More

  2. Refractometer Rugged Case for MISCO Palm Abbe

    Rugged Proof-Case for Palm Abbe Digital Refractometer

    This virtually indestructible case has a fitted foam insert that cushions the Palm Abbe in the event of rough handling. Two heavy-duty latches secure the lid against an integral O-ring providing a waterproof seal to 100 feet (30.5 meters) under water. Compatible with Palm Abbe refractometers with or without the Rubber Armor Jacket. Learn More

  3. MISCO Palm Abbe Refractometer Rugged Case Jacket Combo

    Rugged Rubber Armor & Proof Case Combo for Palm Abbe Digital Refractometer

    Buy the Rubber Armor Jacket & Rugged Proof Case Together and Save $19.90!

    Adding a Rubber Armor Jacket to a Palm Abbe refractometer increases its durability and provides a better grip. Made of high-grade silicone rubber, the Rubber Armor Jacket is custom fit and will help protect your Palm Abbe from minor bumps and scratches.

    Our rugged Proof Case is water-proof, crush-proof, dirt-proof, dust-proof, drop-proof, rain-proof, snow-proof, sink-proof, even goof-proof. It is perfect for providing an additional level of protection when you use your Palm Abbe in demanding environments.

    Learn More
    $40.00

  4. MISCO Refractometer Calibration Fluid

    Refractometer Calibration Fluid for MISCO Digital Handheld Refractometer

    Special refractometer calibration fluid intended for calibrating the span (high-end) point on MISCO Palm Abbe digital refractometers. Learn More
    $85.00

  5. 1.7 mL Disposable Transfer Pipette for Refractometer

    1.7 mL Disposable Transfer Pipette for Refractometer (500 pack)

    1.7 mL polyethylene (LDPE) plastic transfer pipettes. Qty: 500. Learn More

  6. 1.7 mL Disposable Sample Pipette for Refractometer

    1.7 mL Disposable Transfer Pipette for Refractometer (1,000 pack)

    1.7 mL polyethylene (LDPE) plastic transfer pipettes. Qty: 1,000. Learn More
    $55.00

  7. MISCO ViewPoint Illuminator for Traditional Analog Refractometer

    ViewPoint Illuminator for Traditional Analog Refractometer - Replacement Assembly

    ViewPoint is a light source with a self-contained power supply that provides extra illumination for the scale inside your refractometer. Learn More
    $29.00

  8. MISCO Replacement Rubber Eyepiece for Traditional Analog Refractometer

    Replacement Rubber Eyepiece for Traditional Analog Refractometer

    A snap-on replacement rubber eyecup that comes standard on the model 7084VP+, 7064VP+, 10430VP, 10431VP, 10433VP, 10440VP, and 10441VP. Learn More
    $25.00

  9. MISCO Replacement Dip Sticks for Traditional Analog Refractometer

    Replacement Dip Sticks for Traditional Analog Refractometer

    A total of five dip sticks to replace the dip stick that comes standard on the following models: 7084VP+, 7064VP+, 10430VP, 10431VP, 10433VP, 10440VP, and 10441VP. Learn More
    $25.00

  10. MISCO Replacement Suction Tubes for Traditional Analog Refractometer

    Replacement Suction Tubes for Traditional Analog Refractometer

    A total of five Suction Tubes to replace the Suction Tube that comes standard on the model 7084VP+ and 7064VP+. May also be used with MISCO models: 10430VP, 10431VP, 10433VP, 10440VP, and 10441VP. Learn More
    $25.00

  11. Bovine Blood Centrifuge

    Bovine Blood Centrifuge

    This eight position centrifuge is great for separating plasma from whole blood for testing bovine plasma protein concentration and IgG levels in calves. It spins at a fixed rate of 3,000 rpm, providing a G-force up to 1350 xg, and has a 30 minute timer. The internal rotor is angled at 45° and will accommodate test tubes from 3 to 15 ml. Suction cup feet provide stability and secure countertop mounting. A low-noise, temperature controlled, brushless motor needs little if any maintenance. Learn More

    Regular Price: $280.00

    Special Price: $199.00

11 Item(s)

per page

List  Grid 

Set Descending Direction

Build Your Own Refractometer

Our Build-Your-Own Refractometer section allows you to design a custom refractometer to your exact specifications. First, select the measurement scales. Next, add options and then accessories to your design. Finally, you can print a custom quote or order immediately. TRY IT NOW!

  

Your Shopping Cart

My Cart

You have no items in your shopping cart.

Contact MISCO

6275 Cochran Road, Solon OH 44139

Toll Free 866-831-1999

Phone 440-349-1500 

Fax 440-349-1511

CONTACT MISCO